EVERPURE® AC2 CARTRIDGE

Out of stock

Provides clear, fresh, premium quality ingredient water for great tasting drinking water and cold cup beverages.
Sanitary cartridge replacement is simple, quick and clean; internal filter parts are never exposed to handling or contamination.
Exclusive precoat filtration provides superior chlorine taste & odor reduction and micro-filters dirt and particles as small as 0.2* micron in size by mechanical means.

Proprietary Everpure Micro-Pure® II filtration media effectively inhibits the growth of bacteria on the filter media that can decrease product life.
Does not remove fluoride.

NSF/ANSI Standard 53 certified to reduce cysts such as Cryptosporidium and Giardia by mechanical means

* Validated by ISO 17025 accredited lab for 99.999% reduction of Pseudomonas diminuta following the ASTM F838-05 protocol for the validation of 0.2 μm sterilizing grade filters.

Details

Installation tip:
Never use saddle valve for connection. Use 3/8" water line.
Install vertically with cartridge hanging down.
Allow 2 1⁄2" (6.35 cm) clearance below the cartridge for easy cartridge replacement.
Flush AC2 cartridge by running water through filter for five (5) minutes at full flow.

Operation tip:
Replace cartridge when flow rate becomes inconveniently slow or before rated capacity is reached. It is recommended to replace cartridge at least once per year.
Change cartridges when capacity is reached or when pressure falls below 10 psi (0.7 bar).
Service flow rate must not exceed 0.5 gpm (1.9 Lpm).
Always flush the filter cartridge at time of installation and cartridge change.

Sizing:
Service Flow Rate: Maximum 0.5 gpm (1.9 Lpm)
Rated Capacity: 1,500 gallons (5,678 L)

Info

Article No.

EV960586